THERMOCHIP® DECO: quick and easy installation of decorative panels

Thedecorative panels THERMOCHIP® DECO They can be easily installed on any type ofconstructive solution (wood, metalorconcrete). Besides,reduces by 75%heassembly timecompared to traditional systems.They can be usedthree installation systems:

DIRECT FIXATION

After leveling and placing thestarter parts, HEfix the panels. The fixation onwood and metalwill be done withspecific screwsfor each material while onconcretewill be needednylon plugs and screws.

Among thedecorative panels THERMOCHIP® DECO  will be placedtongueof union. To finish onwood and metal, proceeds toscrewedand if the fixation is carried out on concrete, abatten, a cut is made in thepolystyreneand itscrew. Finally, theperimeter molding.

SEMIDIRECT FIXATION

The position of thewooden or metal battens(with amaximum separationamong the supports of70cm) that will be used to set the decorative panels THERMOCHIP® DECO to the surface. Next, itlevel the perimeterfrom thebatten.

Thestarter partsand they fixate on thempanels. Then they lookhitch partsto the panels and, in turn, the panels to thebattens. Thereedsto join the panels and are fixed on thebatten. To finish, place theperimeter molding.

LEVELING

The position of therodsand itlevel the perimeter. They set the rods; aboutwood and metal, they will be screwed to the beam using aleveling piece; aboutconcrete, the rod will be inserted into the beam with abrass plug.

Theanchor pieces, thebatten, thestarter partsand, on them, thedecorative panels THERMOCHIP® DECO. The panels are fixed to thehitch partsand to thebattens. Thetonguebetween the panels. To finish, we proceed to thelower fixationand place theperimeter molding.